SimpleHexapod

class lsst.ts.mthexapod.SimpleHexapod(base_positions, mirror_positions, pivot, min_length, max_length, speed)

Bases: object

Simple model of a hexapod: 6 linear actuators in an arbitrary arrangement.

The intent is to support the mock hexapod controller; as such this model is somewhat simplistic. The actuators ends are assumed to be perfect point flexures. It is not (yet) possible to compute orientation given actuator lengths.

See make_zigzag_model to make a standard symmetrical zigzag hexapod.

Parameters

base_positionsList [List [float]]

Position of the base end of each linear actuator, as a list of z,y,z tuples, one per actuator.

mirror_positionsList [List [float]]

Position of the mirror end of each actuator at zero orientation, as a list of z,y,z tuples, one per actuator.

pivotnumpy.ndarray

The point whose orientation is set by the move command. For a mirror it will typically be the vertex of the mirror.

min_lengthfloat

Mininum actuator length.

max_lengthfloat

Maximum actuator length.

speedfloat

Actuator speed.

Methods Summary

assert_in_range(actuator_lengths)	Assert that all actuators would be in range if set to the specified length.
compute_actuator_lengths(mirror_positions, …)	Compute actuator lengths, given mirror positions.
compute_mirror_positions(pos, xyzrot)	Compute the actuator mirror positions needed to move the pivot point to a specified orientation.
make_zigzag_model(base_radius, …)	Make a SimpleHexapod of a typical hexapod with 6 actuators in a symmetrical zigzag arrangement.
move(pos, xyzrot)	Move the actuators so the pivot point is at the specified orientation.
moving([tai])	Is any actuator moving?
remaining_time([tai])	Remaining time for this move (sec).
stop()	Stop all actuators.

Methods Documentation

assert_in_range(actuator_lengths)

Assert that all actuators would be in range if set to the specified length.

compute_actuator_lengths(mirror_positions, absolute)

Compute actuator lengths, given mirror positions.

Parameters

mirror_positionsList [numpy.ndarray]

Position of the mirror end of each actuator.

absolutebool

If True then return end to end actuator lengths. If False then return lengths relative to neutral lengths; this requires self.neutral_actuator_lengths.

Returns

actuator_end_to_end_lengthsnumpy.ndarray

End to end length of each actuator.

compute_mirror_positions(pos, xyzrot)

Compute the actuator mirror positions needed to move the pivot point to a specified orientation.

Parameters

posnumpy.ndarray

Desired x, y, z position of pivot point, relative to the neutral pivot point.

xyzrotnumpy.ndarray

Orientation of translated pivot point, as a rotation about x, then y, then z (deg).

Returns

mirror_positionsList [numpy.ndarray]

Resulting position of the mirror end of each actuator.

classmethod make_zigzag_model(base_radius, mirror_radius, mirror_z, base_angle0, pivot, min_length, max_length, speed)

Make a SimpleHexapod of a typical hexapod with 6 actuators in a symmetrical zigzag arrangement.

The base ends of the 6 actuators terminate at 3 points at z=0 evenly distributed about a circle of radius base_radius: actuators 0 and 5 terminate at base_angle0, actuators 1 and 2 terminate at base_angle0 + 120, and actuators 3 and 4 terminate at base_angle0 + 240. The mirror ends of the actuators are similarly arrayed, in a plane at z=mirror_z with attachment points rotated 60 degrees from the base attachment points: actuators 0 and 1 terminate at base_angle0 + 60, etc. This makes a zigzag pattern that is circularly symmetric about the z axis.

base_radiusfloat

Radius of base positions of actuators.

mirror_radiusfloat

Radius of mirror positions of actuators.

mirror_zfloat

z distance between the base ends and the mirror ends of the linear actuators.

base_angle0float

Angle of first base actuator point in x,y plane (deg).

pivotnumpy.ndarray

The point whose orientation is set by the move command. For a mirror it will typically be the vertex of the mirror.

min_lengthfloat

Mininum actuator length.

max_lengthfloat

Maximum actuator length.

speedfloat

Actuator speed.

move(pos, xyzrot)

Move the actuators so the pivot point is at the specified orientation.

Parameters

posnumpy.ndarray

x, y, z position of pivot point.

xyzrotnumpy.ndarray

Orientation of translated pivot point, as a rotation about x, then y, then z (deg).

Returns

durationfloat

Duration of the move (second).

moving(tai=None)

Is any actuator moving?

remaining_time(tai=None)

Remaining time for this move (sec).

stop()

Stop all actuators.